Hydraulic Pile Driver FR 600
The FR 600 pile driver is designed to work on a free suspension and can be hung on a hydraulic crane, crane manipulator, or excavator weighing 30 tons or more.
The FR 600 pile driver is equipped with a high-performance vibration dampener, which allows the use of the vibrational weight FR 600 even on hydraulic cranes of small freight capacity. The FR 600 pile driver can be equipped with a single hydraulic clamp for working with Larsen sheet piles, n-beams and pipes with a diameter of 325-530 mm.
The FR 600 vibro hammer can also be equipped with two hydraulic clamps for working with pipes and piles from 530 to 1020 mm.
The FR 600 pile driver can be connected to the hydraulic station PP140250 with an electric motor drive. When using this vibro hammer combined with power pack PP140250 with electric drive the customer receives the best version of an environmentally friendly pile driver with the reduced noise level for working in urban conditions.
So, the distinctive features of FR 600 are
- low mass of the head part - 1200 kg
- high-performance vibration damper
- nonresonant start and stop of the vibrator
Vibro Hammer Technical Data and Montage
| Data Name | Value |
|---|---|
| Dynamic Weight (including clamping device), kg | 1680 |
| Rates Eccentric Speed, RPM | 1750 |
| Rated Frequency, Hz | 30 |
| Eccentric Moment, kN.m | 184 |
| Centrifugal Force, kN (t) | 617 (62.9) |
| Amplitude Maximum, mm | 15 |
| Rated Fluid Flow, LPM | 180 |
| Fluid Work Pressure, bar | 250 |
| Hydraulic Fluid, recommended types | mineral oils HL, HLP, HVLP ISO 32 |
| Hydraulic Fluid Temperature Range, °C | -20...+60 |
| Clamp Force, kN (ton) | 70 (75) |
| Puling Force Maximum (to pulling element), kN (t) | 60 (6) |
| Piling Element Weight Maximum, kg | 5000 |
| Immersion Depth for Beams and Piles, m | up to 25 |
| Immersion Depth for Pipes, m | up to 20 |
| Transport Overall Dimensions (protection incl.) LWH, cm | 1645x1340x956 |
| Weight of Pile Driver (protection shell incl.), kg | 1740 |
German 
English